

In-Line Vertical – Model 7688 ATEX Certified
We reply Monday to Friday, 9:00 a.m. to 6:00 p.m. (Mexico City time) · +52 55 2458 7374
Description
The Groth Model 7688 is a vertical in-line deflagration flame arrester designed to inhibit flame propagation in gas piping systems and protect low-pressure tanks containing flammable liquids. Flame arresters protect low-flash-point liquids from external ignition sources, providing greater fire protection and safety.
How does the 7688 differ?
GROTH ATEX-certified (EN ISO 16852) deflagration flame arresters are distinguished by mounting and gas group: 7678 is a vertical end-of-line unit with weather hood; 7688 (vertical) and 7698 (horizontal) are in-line units for IIA gases (NEC D, MESG ≥ 0.90 mm); 7588 (vertical) and 7598 (horizontal) use the same body but are certified for IIA1 only (MESG ≥ 1.14 mm, methane-type gases).
- Mounting: in-line, vertical; maximum run of 50 diameters upstream of the flame arrester
- Gas group: NEC D / IEC IIA
- Burn time: 10 min (2" to 6"), 2 min (8" to 12")
- Sizes: 2" to 12"
- Materials: aluminum, carbon steel or stainless steel body; 316L stainless steel element
Manufacturer data (Groth Corporation).
Unique recessed seat for superior protection
Fast, easy maintenance
Modular design that allows easy, cost-effective maintenance of the flame bank
The flame arrester element geometry maximizes flame-quenching capability while minimizing pressure drop
The proven crimped-ribbon spiral-wound flame arrester element offers reliable protection
Flange sizes: from 2” (DN50) to 12” (DN300)
Standard housing material: Aluminum, Carbon steel, Stainless steel
Standard base material: Aluminum, Carbon steel, Stainless steel
Standard flame arrester element material: 316L stainless steel
Maximum length/diameter ratio (L/D): 50 (test parameters based on EN ISO 16852:2010)
Operating temperature range: -4 to 140 °F (-20 to 60 °C)
Burn time tBT: 2 minutes (sizes 8”, 10”, 12”)
Burn time tBT: 10 minutes (sizes 2”, 3”, 4”, 6”)
NEC gas group D, IEC gas group IIA (MESG ≥ 0.90 mm)
Certified under the ATEX Directive in compliance with EN ISO 16852:2010
External paint or coating available
Drilling per DIN or ASME/ANSI standards available
Threaded and instrumentation ports
Factory-installed thermocouples for flame detection, required under the ATEX code
