P&V Control Devices
My Cart
Total $0.00
In-Line Vertical – Model 7588 ATEX Certified
In-Line Vertical – Model 7588 ATEX Certified
In-Line Vertical – Model 7588 ATEX Certified In-Line Vertical – Model 7588 ATEX Certified

In-Line Vertical – Model 7588 ATEX Certified

Price on request
Request a quote

We reply Monday to Friday, 9:00 a.m. to 6:00 p.m. (Mexico City time) · +52 55 2458 7374

Description

The Model 7588 is a vertical in-line deflagration flame arrester designed to inhibit flame propagation in gas piping systems and protect low-pressure tanks containing flammable liquids. Flame arresters protect low-flash-point liquids from external ignition sources, providing greater fire protection and safety.

How does the 7588 differ?

GROTH ATEX-certified (EN ISO 16852) deflagration flame arresters are distinguished by mounting and gas group: 7678 is a vertical end-of-line unit with weather hood; 7688 (vertical) and 7698 (horizontal) are in-line units for IIA gases (NEC D, MESG ≥ 0.90 mm); 7588 (vertical) and 7598 (horizontal) use the same body but are certified for IIA1 only (MESG ≥ 1.14 mm, methane-type gases).

  • Mounting: in-line, vertical
  • Gas group: IEC IIA1 / NEC D
  • Burn time: 5 min
  • Sizes: 2" to 12"
  • Materials: aluminum, carbon steel or stainless steel body; 316L stainless steel element

Manufacturer data (Groth Corporation).

• Gas group IEC IIA1

Vertical installation only

Burn time tBT 5 minutes*

The modular design allows easy, cost-effective maintenance of the flame bank

The flame arrester element geometry maximizes flame-quenching capability while minimizing pressure drop

The proven crimped-ribbon spiral-wound flame arrester element offers reliable flame protection

*Test parameters based on EN ISO 16852:2010

Size: 2″ (DN50) to 12″ (DN300)

Material:

Standard housing material: carbon steel, stainless steel, aluminum

Standard flame arrester element material: 316L stainless steel

Pressure:

Maximum operating pressure: 15.7 psia (1.08 bara)

Test parameters based on EN ISO 16852:2010

Certification:

Certified under the ATEX Directive in compliance with EN ISO 16852:2010

Certificate number: IBExU12ATEX2018X

Thermocouple required for flame detection per ATEX code

Temperature:

Operating temperature range: -4 to 140 ºF (-20 to 60 ºC)

External paint or coating available

DIN or ASME/ANSI drilling available

Threaded instrument ports available

Factory-installed thermocouples for flame detection

×
×

Web design by Miguel Ángel Gutiérrez Powered by OMNES BOSS