P&V Control Devices
My Cart
Total $0.00
Rupture Disc with Isolation Seal
Rupture Disc with Isolation Seal
Rupture Disc with Isolation Seal Rupture Disc with Isolation Seal

Rupture Disc with Isolation Seal

Price on request
Request a quote

We reply Monday to Friday, 9:00 a.m. to 6:00 p.m. (Mexico City time) · +52 55 2458 7374

Description

The isolation seal (IS) rupture disc is a flat composite rupture disc that is installed between standard-bore ASME 150# flanges. The recommended operating pressure is 50% of the disc's minimum burst pressure.

IS discs are typically used for:

  • Low-pressure relief of atmospheric storage tanks.

  • Isolation of upstream relief valve manifolds.

  • Corrosion barrier.

  • Environmental seal.

The IS disc is available in two designs:

  • IS-1: Bursts in one direction only.

  • IS-2: Bursts at an identical rating in either the positive or vacuum direction.

The IS disc includes a high-visibility flow direction tag for easy installation, correct orientation and quick inspection. All IS rupture discs in nominal sizes of 1″ (25 mm) and larger include a flow direction tag.

Seat configuration:

Flat seat, no support required.

Burst pressure range:

See Table 7, Minimum/Maximum Burst Pressures for IS Rupture Discs.

Table 2A – Burst Tolerance and Maximum Recommended Operating Pressures.

Available materials:

Top section: 316SS, alloy 600, alloy 400, nickel.

Seal: Fluoropolymer or polyethylene.

Includes a non-asbestos gasket on each side of the disc for easier handling and installation.

Manufacturing range:

See Table 2, Manufacturing Ranges.

Special and reduced manufacturing ranges are available upon request.

Material availability:

Available in a variety of materials to withstand highly corrosive media and atmospheric conditions.

Specified rating types and MIN/MAX are also available.

×
×

Web design by Miguel Ángel Gutiérrez Powered by OMNES BOSS